← View Generic C0164 Guide
Severity: Medium
🚗
Vehicle-Specific Guide
This guide is customized for your 2018 BMW X5
C0164: C0164: Steering Column Position Sensor Circuit Malfunction
on 2018 BMW X5
Fix Cost
$150 - $300
Parts & Labor
Difficulty
3/5
1-2 hours
DIY Possible?
❌ No
Pro recommended
Your Vehicle
2018 BMW
X5
⚠️
Important for 2018 BMW X5 Owners
Before starting repairs, verify which engine your 2018 BMW X5 has. Check your VIN or engine code to ensure you order the correct parts.
📖 What Does C0164 Mean on 2018 BMW X5?
The powertrain control module (PCM) has detected a malfunction in the steering column position sensor circuit, which is used to monitor the steering column's position and angle.
⚠️
Symptoms
- • Steering wheel vibration
- • erratic steering
- • difficulty turning
- • or the steering wheel may feel loose or stiff.
🔍
Common Causes
- • Faulty steering column position sensor
- • wiring issues
- • or a problem with the sensor connector.
🛠️
How to Fix C0164 on 2018 BMW X5
1. Disconnect the battery to reset the system. 2. Check and clean the sensor connector. 3. Replace the steering column position sensor if faulty. 4. Check and repair any wiring issues.
🔧
Need Maintenance Info for Your X5?
Get oil capacity, filter specs, and torque settings for your specific 2018 BMW X5.
View 2018 BMW X5 SpecsParts for 2018 BMW X5
Essential Tool
🔗
Related Diagnostic Codes
Other codes that may appear with C0164
C0162
Sequential Code
C0162: Brake System Pressure Sensor Circuit Malfunction
Medium
C0163
Sequential Code
C0163: Rear Suspension Control Arm Fracture
High
C0165
Sequential Code
C0165: Electronic Stability Control (ESC) Malfunction
High
C0166
Sequential Code
C0166: Traction Control System Malfunction
Medium
💡 Why These Codes Are Related:
- • Similar Issues: Same root cause or component failure
- • Related Problems: Often occur together due to system interactions
- • Sequential Codes: Progressive failure stages or multiple sensors
- • Same System: Components within the same automotive system